| Links |
simmsmemorychips
|
| Other Links |
|
|
 Different Speeds of Memory The faster the memory, the simmsmemory faster a computer operates. Memory comes rated at different simmsmemory speeds, and the faster the memory, the more it costs. Memory speed is measured in nanoseconds, and the lower the nanosecond rating, the faster the memory. For example, a 60 nanosecond chip is faster than an 80 nanosecond simmsmemory chip. Be sure that the memory you buy is as fast as the memory you''re replacing. Many newer, faster Pentiums come with RAM that can run at 100Mhz-the speed of the system bus. It’s always a good time to add random- access memory (RAM) to your computer. That’s because RAM is easy to install and can improve the performance of even the weakest computer. A couple of years ago, the average computer contained four megabytes (MB) of RAM. Now the standard is up to 16MB, with many new computers sporting 24MB or more. And users who play computer games or work with desktop publishing programs might have as much as 128MB of RAM. What does the CL stand for on memory chips? CL stands for CAS Latency. When a module is labeled CL2 it means there are only two clock cycles before the module can send the first block of data. CL3 means there are three cycles before the first block of data is sent. Cl2 is considered to be a small percentage faster than CL3 modules. PC100 and PC133 modules are manufactured as both CL2 and CL3. You will need to check with your system''s simmsmemory requirements to see which option is compatible with your system. Does it matter which slots I plug my new module in? In general, you will simmsmemory get the best performance if you put the largest module (in megabytes) in the lowest-numbered slot. For example, if your computer comes with 32MB of removable memory and you want to add 128MB, it would be best to put the 128MB module into slot 0 and the 32MB module into slot 1. My system will not boot after installing your memory? Are you getting an error message on the monitor? If it states a Non-System Disk error occurred, check to make sure that you do not have a non-bootable disk in the floppy drive, simmsmemory or even the CD-ROM drive if your system can boot to the CD drive. The last step upon leaving the case should always be to ensure that every cable and power plug is fully seated. If this also does not resolve the problem, try just the new module alone in the system to determine if it is compatible with your system. If the system boots with simmsmemory just the new module, try shutting down and adding the other modules one by one to determine if there may be a chipset incompatibility. What is the difference between ECC and non-ECC (non-parity) memory? If you are unsure of which type you have, just count the number of small black chips on one of your existing memory modules. If the number of chips divides by three evenly, then you need ECC. If the number of chips is does NOT divide evenly by three, you have non-ECC or non-parity memory. If you plan to use your system as a server or a similar mission critical type machine, you may want to take advantage of ECC. If you plan to use your system simmsmemory for regular home, office, or gaming applications, simmsmemory you are better off with simmsmemory non-ECC. Current technology DRAM is very stable and memory errors are rare, so unless you have a need for ECC, you are better served with non-parity SDRAM. Would you like to find ddr, simm or dimm memory but aren't sure where to look? Search no further. We have any type of memory for any computer you have. Shop our pages and purchase everything you need online!
|