|
|
 FEATURES RAM comes in the form of a chip, and to increase memory, you simply plug ddrramreviews additional chips in ddrramreviews to slots on your computer''s main board. The capacity of a RAM chip is measured in megabytes, or millions of bytes. Most systems now come with 48MB ddrramreviews of RAM and up. You should have at least 32MB of RAM for running Windows, but with the ever-growing demand for memory, 64 MB or higher is ideal. BUYING TIPS Before buying additional memory for your computer, consult the ddrramreviews hardware manual that came with your computer. The manual will tell you what kind of memory is required for your system. It is also important to check the number of RAM slots in your computer, as ddrramreviews there is a limited number on the main board for installing memory (anywhere from two to eight). You can only install as many memory modules as you have slots, so plan ahead. If you want to add or upgrade to 128MB of RAM, for instance, get a single 128MB RAM chip, not two 64MB modules. This will save you one RAM slot for future expansion. What is the difference between 2-clock and 4-clock memory? Two types of SDRAM modules are the 2-clock and the 4-clock module. Structurally, they are the same, but they are accessed differently. A 2-clock SDRAM module is set up so that each clock cycle accesses two chips on the module. A 4-clock SDRAM setup accesses 4 chips per clock cycle. To choose what kind to get, you must look into the motherboard''s documentation. 4-clock modules are the more commonly used. The typical indication of the wrong type being used is a system giving error beeps and not booting as it cannot use the memory installed. The system will not proceed past POST (Power On Self Test). 2-clock was only used in 66 MHz systems. All PC 100 and PC 133 memory is 4-clock only. Do all ddrramreviews of your SDRAM modules use SPD? SPD, or Serial Presence Detect, ddrramreviews is a program in an EEPROM chip on the modules of SDRAM (Synchronous Dynamic Random Access Memory). It tells the system’s BIOS what the specifications and settings of the memory module are. All of our SDRAM DIMMs have SPD programming. The system BIOS should therefore be set on AutoDetection for memory. Would you like to find ddr, simm or dimm memory but aren't sure where to look? Search no further. We have any type of memory for any computer you have. Shop our pages and purchase everything you need online!
|